HP 64XL Compatible Printers, Page Yields & Remanufactured Ink Guide
HP 64XL Black and Tri-color are high-yield ink cartridges for select U.S.-market HP ENVY, HP ENVY Photo, HP ENVY Inspire, and HP Tango printers. This guide covers Starink's verified U.S. printer list, HP 64XL page yields, what comes in the 2-Pack, original OEM chip reuse, installation, storage, remanufactured ink, and cartridge-recognition troubleshooting.
Always confirm the complete HP printer model and the printer's sales region before ordering. Similar printer families sold in different regions can use different cartridge numbers.
Written by StarinkCompatibility reviewed by the Starink Product Compatibility TeamLast updated September 4, 2026
Starink HP 64XL ink cartridges are compatible with the verified U.S. HP ENVY 7100 and 7800 Series printers; HP ENVY Photo 6200, 7100, and 7800 Series printers; HP ENVY Inspire 7200 and 7900 Series printers; and HP Tango / Tango X printers listed in this guide.
The Starink replacement set includes one remanufactured HP 64XL Black cartridge and one remanufactured HP 64XL Tri-color cartridge. Each cartridge includes an original OEM chip that is already installed, so no chip transfer is required.
Starink rates the HP 64XL Black cartridge at up to 600 pages and the HP 64XL Tri-color cartridge at up to 415 pages. Each figure applies to an individual cartridge and should not be combined as one 1,015-page 2-Pack yield.
Compatibility, package contents, OEM chip information, and Starink page-yield specifications last reviewed September 4, 2026.
Full HP 64XL Compatible Printer List by Series
The printer list below follows Starink's final verified U.S. compatibility set for this guide. For the two combined ENVY / ENVY Photo groups, models are shown under their original series names so shoppers can match the wording on their printer more easily.
Important: U.S. printer compatibility only.
This guide applies to the verified U.S.-market HP printers listed above. If your printer was purchased outside the United States, do not assume that a visually similar printer uses the same HP 64 / 64XL cartridge family. Cartridge numbering can vary by sales region. Before ordering, check the cartridge number on the original cartridge, the printer supplies screen, or the printer documentation.
HP 64XL Black and Tri-color Page Yields
Starink HP 64XL is a high-yield Black and Tri-color replacement set. Page yield must be read per individual cartridge rather than as a combined total for the 2-Pack.
Starink Cartridge
Approximate Page Yield
Color
HP 64XL Black
Up to 600 pages
Black
HP 64XL Tri-color
Up to 415 pages
Cyan, Magenta & Yellow
Actual output varies with page coverage, photos, print settings, cleaning cycles, print frequency, paper, and other usage conditions. Do not add 600 and 415 together and describe the 2-Pack as a single 1,015-page yield.
What's Included in the Starink HP 64XL 2-Pack?
Starink currently offers one HP 64XL purchase format: a complete remanufactured Black and Tri-color 2-Pack. Starink does not currently offer the standard-capacity HP 64 cartridge as a separate product.
1 × HP 64XL Black Cartridge
Remanufactured high-yield Black cartridge with an original OEM chip already installed. Rated by Starink for up to 600 pages.
1 × HP 64XL Tri-color Cartridge
Remanufactured high-yield Tri-color cartridge with an original OEM chip already installed. Rated by Starink for up to 415 pages.
Also included: 1 × User Guide. Total package quantity: 2 ink cartridges.
How to Install HP 64XL Ink Cartridges
Confirm that your exact printer model appears in the verified U.S. compatibility list above.
Turn on the printer and open the ink-cartridge access area.
Wait until the cartridge carriage stops moving and becomes accessible.
Remove the depleted cartridge from the correct Black or Tri-color slot.
Remove the new HP 64XL cartridge from its packaging and remove all protective material.
Do not touch the copper-colored electrical contacts or ink nozzles.
Insert the HP 64XL Black or HP 64XL Tri-color cartridge firmly into the matching slot until it is seated.
Close the printer cover and follow any on-screen prompts.
Run a test print or alignment if the printer requests one.
What Does Remanufactured HP 64XL Mean?
A remanufactured HP 64XL ink cartridge is a previously used cartridge that has been professionally processed for reuse. The cartridge is cleaned, inspected, refilled, assembled, and tested before shipment rather than being manufactured as an entirely new replacement cartridge.
Professionally Remanufactured
The cartridge goes through cleaning, inspection, refilling, assembly, and performance testing before it is prepared for resale.
Original OEM Chip Reused
Each Starink HP 64XL cartridge includes an original OEM chip that is already installed on the finished cartridge.
No Chip Transfer Required
You do not need to remove a chip from your empty cartridge or move one to the Starink replacement cartridge before installation.
Factory Tested Before Shipment
Finished cartridges are checked for cartridge recognition and print performance before shipment.
The retained OEM chip supports cartridge-status and ink-level information after successful installation in supported U.S.-market printers. Printer firmware, sales region, printer condition, electrical contact, and cartridge seating can still affect recognition or displayed ink information, so no replacement cartridge should be described as guaranteed to work with every firmware version.
Proper storage helps protect the cartridge, electrical contacts, and ink before installation. If you are keeping a spare HP 64XL cartridge for later use, leave it sealed until you are ready to install it.
Keep It Sealed
Leave the cartridge in its original protective packaging until you are ready to use it. Do not remove protective tape or covers early.
Choose a Cool, Dry Indoor Location
Store cartridges away from direct sunlight, heaters, freezing conditions, and places that experience large temperature swings.
Avoid Touching Contacts or Nozzles
If a cartridge has been unpacked, avoid touching the copper-colored electrical contacts or ink nozzles, as oils, dust, or debris can interfere with printing or recognition.
Install Opened Cartridges Promptly
For best results, do not leave an unpacked cartridge sitting unused for extended periods. If it was exposed to unusually hot or cold conditions, allow the sealed cartridge to return to normal indoor temperature before opening and installing it.
For long-term storage, an unopened cartridge in its original packaging is preferable to storing an opened cartridge outside the printer.
Firmware and Cartridge Recognition Troubleshooting
If your printer does not recognize a replacement HP 64XL cartridge, first confirm the exact printer model, sales region, and required cartridge family. If the model or regional cartridge family is wrong, reinstalling the cartridge will not correct the mismatch.
Confirm the complete HP printer model, including any letters such as “e” at the end.
Confirm that the printer is a verified U.S.-market model listed in this guide.
Remove all protective tape and packaging from the new cartridge.
Check that the Black and Tri-color cartridges are installed in their correct slots.
Remove and reinstall each cartridge firmly.
Restart the printer and follow any on-screen prompts.
If the issue began immediately after a printer firmware or software update, review the update history before continuing troubleshooting.
Starink currently offers the high-yield HP 64XL Black and Tri-color 2-Pack only. The set includes one Black cartridge and one Tri-color cartridge, with original OEM chips already installed.
BLACK + TRI-COLOR · ORIGINAL OEM CHIP REUSED
Remanufactured HP 64XL Ink Cartridges 2-Pack
1 × HP 64XL Black + 1 × HP 64XL Tri-color
High-yield Black and Tri-color replacement ink for the verified U.S. HP ENVY, ENVY Photo, ENVY Inspire, and HP Tango printers listed in this guide. Black is rated for up to 600 pages and Tri-color for up to 415 pages.
Starink HP 64XL ink cartridges are compatible with the verified U.S. HP ENVY 7100 and 7800 Series printers; HP ENVY Photo 6200, 7100, and 7800 Series printers; HP ENVY Inspire 7200 and 7900 Series printers; and HP Tango and Tango X printers listed in this guide.
How many pages do Starink HP 64XL cartridges print?
Starink rates the HP 64XL Black cartridge for up to 600 pages and the HP 64XL Tri-color cartridge for up to 415 pages. Each yield applies to one individual cartridge and should not be added together as a combined 2-Pack total.
What is included in the Starink HP 64XL 2-Pack?
The complete set includes 1 × remanufactured HP 64XL Black cartridge, 1 × remanufactured HP 64XL Tri-color cartridge, and 1 × User Guide. Starink currently sells the high-yield HP 64XL Black and Tri-color 2-Pack only.
Do Starink HP 64XL cartridges include original OEM chips?
Yes. Each Starink remanufactured HP 64XL cartridge includes an original OEM chip that is already installed on the finished cartridge. No chip transfer is required.
What does remanufactured HP 64XL mean?
A remanufactured HP 64XL cartridge is professionally processed for reuse through cleaning, refilling, inspection, assembly, and testing. Starink HP 64XL cartridges also include original OEM chips already installed on the finished cartridges.
How should I store HP 64XL ink cartridges?
Keep unopened HP 64XL cartridges sealed in their original packaging in a cool, dry indoor location away from direct sunlight, heaters, freezing conditions, and large temperature swings. Do not remove protective tape until installation, and avoid leaving an unpacked cartridge unused for an extended period.
What ink does the HP ENVY 7132 use?
The verified U.S. HP ENVY 7132 uses the HP 64 cartridge family and can use high-yield HP 64XL Black and HP 64XL Tri-color cartridges. Starink currently offers the HP 64XL Black and Tri-color 2-Pack only. See HP ENVY & ENVY Photo 7100 Series Ink Cartridges.
Does the HP ENVY Photo 7855 use HP 64XL ink?
Yes. The verified U.S. HP ENVY Photo 7855 is included in Starink's HP 64XL compatibility list and uses one Black cartridge and one Tri-color cartridge. See HP ENVY & ENVY Photo 7800 Series Ink Cartridges.
Yes. The verified U.S. HP Tango X is included in Starink's HP 64XL compatibility list and can use HP 64XL Black and Tri-color cartridges. See HP Tango Ink Cartridges.
Can HP 64XL replace standard HP 64 cartridges?
For verified U.S. printers that use the HP 64 cartridge family, HP 64XL is the higher-yield version and uses the same Black and Tri-color cartridge arrangement. Starink currently offers the high-yield HP 64XL 2-Pack only.
Can I use this HP 64XL set in a printer purchased outside the United States?
Not necessarily. Cartridge numbering can vary by sales region. This guide applies to the verified U.S.-market printers listed above. If your printer was purchased elsewhere, confirm the cartridge number on the original cartridge or in the printer documentation before ordering.
What should I do if my HP printer does not recognize a replacement HP 64XL cartridge?
Confirm the exact printer model and sales region first. Then remove all protective material, verify that the Black and Tri-color cartridges are in the correct slots, reseat them firmly, restart the printer, and read the Ink Cartridge Troubleshooting Guide if the issue began after an update.
Sources and Specification Notes
Compatibility and Starink product specifications last reviewed: September 4, 2026.
Starink page-yield figures in this guide apply to each individual cartridge and should not be combined into one 2-Pack total. This guide intentionally uses Starink's final verified U.S. printer list; printer families or model variants not listed here should not be assumed compatible.