HP OfficeJet Pro 8125 and 8125e printers use HP 923 or higher-yield HP 923e ink cartridges. Starink offers a remanufactured HP 923e Black, Cyan, Magenta, and Yellow 4-Pack with original OEM chips already installed. No chip transfer is required. The supported models include the HP+ capable OfficeJet Pro 8125e.
Includes 1 × HP 923e Black, 1 × Cyan, 1 × Magenta, and 1 × Yellow. Black yields up to 1,000 pages; each color yields up to 800 pages per individual cartridge. Actual output varies with use.
The Starink Remanufactured HP 923e 4-Pack supports the six HP OfficeJet Pro models below. The highlighted 8120 Series group contains the two models covered by this page.
Printer names and trademarks are used only to identify product compatibility. Starink is an independent remanufactured-cartridge brand and is not affiliated with HP.
Each rating applies to one individual cartridge:
| Cartridge | Page Yield |
|---|---|
| HP 923e Black | Up to 1,000 pages |
| HP 923e Cyan | Up to 800 pages |
| HP 923e Magenta | Up to 800 pages |
| HP 923e Yellow | Up to 800 pages |
Page yield is measured per individual cartridge under ISO/IEC testing conditions. Actual results vary with page content, printer settings, print frequency, maintenance cycles, and other usage conditions. Do not add individual cartridge yields into one combined 4-Pack total.
Original OEM chips are reused and already installed. No chip transfer is required, and each color can be replaced separately when needed.
HP 923 is the standard-capacity cartridge family, while HP 923e provides higher page yields. The Starink product on this page is the remanufactured HP 923e 4-Pack.
| Cartridge | Black Yield | Each Color Yield |
|---|---|---|
| HP 923 | Up to 500 pages | Up to 400 pages |
| HP 923e | Up to 1,000 pages | Up to 800 pages |
The letter e in OfficeJet Pro 8125e identifies the printer model; it does not by itself specify the capacity of an installed cartridge. Check both the printer model and cartridge number.
Each Starink remanufactured HP 923e cartridge reuses an original OEM chip, so no chip transfer is required.
The cartridge arrives with its original OEM chip already installed and is designed for communication with the listed supported HP OfficeJet Pro printers.
Starink HP 923e is designed for the listed OfficeJet Pro 8125 and HP+ capable OfficeJet Pro 8125e. This 8120 Series page limits HP+ model support to the listed 8125e.
Compatibility should always be checked by the complete printer model before ordering. Support for the listed model does not extend to every HP+ printer.
Each remanufactured cartridge reuses an original OEM chip for communication with the supported printer.
The chip is already installed, so you do not need to remove or transfer a chip from an old cartridge.
Designed for the OfficeJet Pro 8125 and HP+ capable OfficeJet Pro 8125e covered by this page.
Starink remanufactured HP 923e cartridges reuse original OEM chips and are designed to support normal cartridge communication with the listed supported printer models.
Turning off automatic firmware updates is not required to install this product. If you prefer to control when future printer updates are installed, see our firmware settings guide.
Use your OfficeJet Pro 8125 or 8125e for the document sizes and paper types supported by your printer.
Check the exact printer model, cartridge family, protective material, and cartridge seating first. Record the exact printer message if it persists after reseating and restarting.
If the issue began after an update, note the timing and firmware version. A recognition message alone does not establish that firmware caused the issue.
The HP OfficeJet Pro 8125 uses the HP 923 cartridge family and supports HP 923e higher-yield cartridges. Starink offers a remanufactured HP 923e Black, Cyan, Magenta, and Yellow 4-Pack for this listed model.
The HP OfficeJet Pro 8125e supports the Starink Remanufactured HP 923e 4-Pack featured on this page. It contains separate Black, Cyan, Magenta, and Yellow cartridges with reused original OEM chips. Confirm the complete printer model and cartridge number before ordering.
Yes. The OfficeJet Pro 8125 and 8125e covered by this page support Starink remanufactured HP 923e ink. This compatibility statement applies to these two listed models, not every printer with an 8120 Series name.
Yes. The HP+ capable OfficeJet Pro 8125e is a listed supported model for Starink HP 923e. Check the complete printer model before ordering; this does not mean that every HP+ printer is supported.
The Starink HP 923e 4-Pack supports six HP OfficeJet Pro models: 8125, 8125e, 8135, 8135e, 8139, and 8139e. This page focuses on the 8125 and 8125e in the 8120 Series group.
HP 923e Black yields up to 1,000 pages, while Cyan, Magenta, and Yellow each yield up to 800 pages per individual cartridge. Actual output varies with page content, settings, print frequency, and maintenance cycles. Do not add these figures into one 4-Pack yield.
HP 923 is the standard-capacity cartridge family, while HP 923e provides higher page yields. HP 923 is rated up to 500 Black pages and 400 pages per color; HP 923e is rated up to 1,000 Black pages and 800 pages per color. The Starink product featured here is the remanufactured HP 923e 4-Pack.
Yes. The featured product is the Starink Remanufactured HP 923e 4-Pack with original OEM chips reused. It is a Starink replacement product, not a new Original HP cartridge set.
Original OEM chips are reused, and no chip transfer is required. Each Starink HP 923e cartridge arrives with its reused original OEM chip already installed.
The complete 4-Pack contains one HP 923e Black, one Cyan, one Magenta, and one Yellow cartridge. The four cartridges are separate, so you can replace the color that needs replacement.
Turning off automatic firmware updates is not required to install this product. If you prefer to control when future updates are installed, see How to Turn Off Automatic Printer Firmware Updates.
Confirm the exact printer model, open the cartridge-access area, remove the cartridge being replaced, prepare the matching HP 923e color, insert it securely, and allow the printer to complete recognition. See the Installation Guide for detailed steps.
Check the exact printer model, cartridge family, protective material, and cartridge seating first. Record any persistent printer message and review Cartridge Recognition Troubleshooting. If the issue began after an update, also note the firmware version and timing.
The displayed per-cartridge price is the current 4-Pack price divided by four, rounded to two decimal places. The purchase is for the complete 4-Pack; the per-cartridge figure is a price comparison, not an offer to buy one cartridge separately.
Select 2 or 3 items to compare
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
