The Epson WorkForce Pro WF-3820 uses Epson 822 standard-capacity or 822XL high-capacity ink cartridges. Starink offers a remanufactured Epson 822XL 8-Pack for this printer with two Black, two Cyan, two Magenta, and two Yellow cartridges. Each cartridge yields up to 1,100 pages; OEM chips are included.
Includes 2 × Black, 2 × Cyan, 2 × Magenta, and 2 × Yellow: two complete four-color sets. Each cartridge yields up to 1,100 pages. Yields are per individual cartridge; actual output varies with use.
This page is for the Epson WorkForce Pro WF-3820. The same Starink remanufactured Epson 822XL 8-Pack also fits the exact models below. Select a printer to visit its ink page.
Check the complete printer model and cartridge number before ordering. Printer names and trademarks identify compatibility. Starink is an independent remanufactured-cartridge brand and is not affiliated with Epson.
These Starink replacement-cartridge ratings apply to each individual cartridge:
| Cartridge | Page Yield |
|---|---|
| Epson 822XL Black | Up to 1,100 pages each |
| Epson 822XL Cyan | Up to 1,100 pages each |
| Epson 822XL Magenta | Up to 1,100 pages each |
| Epson 822XL Yellow | Up to 1,100 pages each |
Page yields are per cartridge and are not one combined pack yield. Actual output varies with page content, printer settings, print frequency, maintenance cycles, and use.
Two complete Black, Cyan, Magenta, and Yellow replacement sets. OEM chips are included on the cartridges; no chip transfer is required.
Epson 822 is the standard-capacity cartridge family; Epson 822XL is the high-capacity option. The Starink product on this page is the remanufactured Epson 822XL 8-Pack.
Capacity describes individual cartridges. Check the number printed on your current cartridge before ordering.
Starink page yields are per cartridge; actual output varies with use. Check exact listings for compatibility, pack contents, chip details, and yield.
Each Starink remanufactured Epson 822XL cartridge includes a pre-installed OEM chip, so no chip transfer is required before installation.
The chip is intended to support communication with the listed WorkForce Pro printers. If a cartridge warning appears, check the exact message and the troubleshooting guidance below.
Starink's Epson 822XL replacement cartridges are remanufactured from previously used cartridges. They are Starink products, not new Original Epson cartridges. The OEM chip is already installed on each cartridge.
The 8-Pack includes two cartridges each of Black, Cyan, Magenta, and Yellow.
Each remanufactured cartridge has its OEM chip installed; no transfer is required.
The stated yield applies to every individual Black, Cyan, Magenta, and Yellow cartridge.
The WF-3820 can support routine office documents and two-sided printing. Choose the paper and print settings appropriate to each job.
Recheck the cartridge family, color slot, protective material, and seating. Note the exact warning and whether it appeared after a firmware update.
The WF-3820 uses Epson 822 standard-capacity or 822XL high-capacity ink cartridges. Starink offers a remanufactured Epson 822XL 8-Pack for this printer.
Yes. The Starink remanufactured Epson 822XL 8-Pack is listed for the Epson WorkForce Pro WF-3820. Check your complete model and cartridge number before ordering.
It includes eight cartridges: two Black, two Cyan, two Magenta, and two Yellow. That is two complete four-color replacement sets.
The 8-Pack supplies two full Black, Cyan, Magenta, and Yellow sets, so you can keep one set as replacements after installing the other.
Each Black, Cyan, Magenta, and Yellow cartridge yields up to 1,100 pages individually. Actual output varies with printing conditions.
No. Up to 1,100 pages is the stated yield of each individual cartridge, not one combined yield for the entire 8-Pack.
Epson 822 is standard capacity; Epson 822XL is high capacity. This Starink product is the remanufactured 822XL 8-Pack.
Yes. They are Starink remanufactured replacement cartridges made from previously used cartridges, not new Original Epson cartridges.
Yes. Each Starink Epson 822XL cartridge includes a pre-installed OEM chip, so no chip transfer is required.
Yes. The Black, Cyan, Magenta, and Yellow cartridges are separate; replace the needed cartridge in its matching color slot.
Besides WF-3820, it fits Epson WorkForce Pro WF-3823, WF-4820, WF-4830, WF-4833, and WF-4834. Check the exact-model links above.
Check the cartridge number, matching color slot, protective material, and seating. Record the exact message and follow the Epson recognition guide; contact Starink if it continues.
Select 2 or 3 items to compare
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
